3G & APP

How to use iPhone Safari to view Brickcom IP Camera?

Follow the steps below to get the video streaming on iPhone.

Scenario:


Step1. Go to the Video Configuration page and configure the stream setting as the parameters below.
Aspect Ratio as 4:3
Video codec as H.264 for stream1
Resolution as 640x480or lower
Frame Rate as 5 fps
Bitrate 512Kbps
The Video settings of 3GPP will need to be configured depends on the bandwidth of your network environment. The configuration is just for the reference.



Step2. Go to the HTTP/HTTPS Configuration page and check the HTTP port.



Step3. Configure the Port Forwarding rule in Router. Add the port 80 to IP Camera’s IP Address.



Step4. Connect iPhone to Internet, via 3G or Wi-Fi.



Step5. Open the Safari browser and keyin the IP Camera’s IP Address.



Step6.Keyin the username and password.



Step7. Get the video streaming on your iPhone.